With this I would need 2 molex to 6 pin, to then fit that 6 pin on the dual adapter.

The sense pin is just a ground, but the 8-pin standard allows for the card to check to make sure that ground is present to make sure an 8-pin is plugged in. IDE 4Pin Molex x 2 To PCI-E 8Pin power cable Length: approx 16cm Package Included: 1 x 4pin to 8pin Power Cable. $19.99. Wie gesagt würde ich meinen PC gerne erst mit der Zeit aufrüsten, bevor ich daher etwas kaputt mache wollte ich um euren Rat bitten. It needs one 6 pin and one 8 pin power connection. Since PCIe spec is 150w per 8 … I think the better option would probably be to use the cables that already have two 8 pins on the end though. Joined Apr 21, 2011 Messages 494 (0.15/day) Location Hesperus IV System Specs. Das sollte kein großes Problem sein. I tried buying a 6 pin to 8 pin, and molex to 8 pin, but couldn't find any in a 20 miles radius! If it is on a single molex modular cable, 12 amps exceeds the 8 amp rating of most connectors, which can cause it … The problem I'm having is that the current motherboard uses an 8-pin power connector for the CPU, but the power supply only has a 4-pin connector. Depending on the GPU you're using, dual molex to 8 pin could be asking for trouble. With the above adapter I'd be putting 2 molex connections into one 8 pin, but since molex carries less power than 8 pin I don't think there would be an issue. EVGA SuperNOVA G2 Modular PSU 8 Pin to 8 Pin and 6 Pin PCIE Cable. Thanks for the info. so im not really worried about extra power draw. i checked and the power consumption of my gpu is 75 watts. Add To Cart. Hi.

8 pin can draw more than 150 watts, an amperage of more than 12 amps. Perhaps an 8 pin PCI-E uses beefier wires for the 3 +12v leads? Und aus dem zweiten 6-Pin zusammen mit LW-Molex auf einen zweiten 8-Pin adaptieren? Thanks for the info. With the above adapter I'd be putting 2 molex connections into one 8 pin, but since molex carries less power than 8 pin I don't think there would be an issue. Added bonus, the CPU cable is hardwired so it's no additional wiring mess … I'm wondering if it is safe to use an adapter like the one from the link below. I know that other adapters--namely Molex to SATA- … With the dual molex adapter, you're pulling all the 12V current through two wires on the peripheral cable and two pins on the end of the connector that plugs into the supply.

Do I really have to plug in the EATX12V_2 plug (4-pin) and EX_PLUG (Molex) on my RAMPAGE V? Ich verstehe nur nicht, wo du noch mehr Adapter einsetzen wolltest. 6 / 8 pin PCIe power jacks do not have either 5V or 3.3V on them which SATA power contains. That said, 6 pin PCI-E is rated for 75w. I think the better option would probably be to use the cables that already have two 8 pins on the end though. besides, i'm really curious to know if this works! Color: Multi-Color Length: 8" Connector A: 1x EPS 8pin female Connector B: 1x EPS 8pin male Model #: EPS8EX-8 Item #: N82E16812119947 Return Policy: Standard Return Policy $4.99 – Because there is actually a chance that the 6-pin on a cheap PSU could be overloaded if it only has 2 +12v pins. $8.49. Thanks! At least that way you're pulling power through three wires and connector pins. Recently built x99/5930K/M.2 and been absolutely loving it, the M.2 is a crazy good concept. Top Sellers. Professional Molex Crimping Tool. At least that way you're pulling power through three wires and connector pins. The 8 pin cable that was supplies is not long enough to reach the 8 pin connector on the motherboard (the psu is at the bottom of the case - whereas the 8 pin connector on the motherboard is at the top; and we all know how ginormous the Rocketfish case is).